Scope of Work

• Check in with representative(Listed in Work Order contacts) on arrival
• Connect the NIC1, NIC2 and ILO port of Server to the Switch
• Wait for  that will assist in the config
• Power on the server and assist  in configuration
• After server config is completed, Document and take pictures of all work done in deliverables

Check out with GM before departing, have them sign off on checklist completion. 

Escalation Path - Contact Project Manager or Work order Manager

Additional Hours and expenses - all expenses must include receipts and any overage in hours must have prior written approval from project manager.

Deliverables -

• Photos of all Work Completed components (EX: Encoders, Cables Patched, Screenshot of Ping to PMS Server.)
• Documentation of Switch Ports used, location of deployment, and network routes.
• Any cables ran, patched, or labeled.
• Ensure you have photos of the following as well:
• Key Server
• Front Picture (Hostname and IP Address Seen)
• Back Picture (Cables Connected Seen)
• Location of the Server at Network Room or Back Office
• MDF/Network Room
• Zoomed in and out picture of Switch wherein Key Server, Encoder, Programmer connects into (Cables with Label)
• Patch Panels used for Key Server & Encoder connections
• Picture of Whole MDF/Network Room
• Front Desk
• Picture of Front Desk Table (Employee POV where Key Encoder can be seen)
• Picture of Key Encoder Cables at Front Desk (Labeled as Key Encoder #1...Key Encoder #2)
• Picture of Entire Front Desk (From Behind the Counter, Key Encoder cable seen if possible)
• Picture of Wall Ports used (with Label) for Key Encoder
• Screenshots of:
• Windows Backup Profile (Showing Backup is taken and scheduled)
• Firewall Profile (Screenshot of Windows Firewall (OFF) and Powershell command showing they are disabled)
• Network Test Results
• 1. Ping From Key Server (LSP) to PMS
• 2. Ping From Front Desk PC ( Network) going to Key Server and LSP Gateway ending in (.98)
• 3. Test-netconnection result of Front Desk PC going to Key Server (Showing Port 9090 passes through)
• If Applicable
• Key Programmer Cable and Wall Ports used (Label as Key Programmer)
•  Router Location
• Picture of Router (Showing Cables connected)
• LSP Firewall Location
• Picture of LSP Firewall (Showing Cables connected)
• Windows Tablets (Onity DKT and PRG)
• Document and picture work completed in deliverables.

No T-Shirts, Shorts, or Jeans. Needed Collared Shirt, Button Up Shirt, Slacks, or Dress Pants are acceptable.

Required Equipment

• Laptop with internet access
• Digital camera or cell phone with clear picture capability
• Ethernet Cables - Quantity three-six | Five to Ten Ft Cables (Left onsite)
• Please attach expense $2 per cable used
• Basic networking Tool Kit
• Cable Toner
• Ethernet patch kit
• Cat 5e or 6 Cabling 250ft on Truck
• Please expense back for cable run going rate in US $0.35 per ft.
• Label Maker